Questions & Answers for: draw up lower thread

Question about LS-2125 Mechanical Sewing Machine

1 Answer

lower thread Drawing up lower thread: I cannot get the upper thread to catch the lower thread. I have followed the directions for threading and inserting the bobbin and for threading the upper thread.

Ad

Question about LS-2125 Mechanical Sewing Machine

1 Answer

...lower thread. what am I doing wrong? perhap bobbin in wrong so it runs in the reverse direction to what it should? Also, check the needle is in the correct position and not too high or low? I would ...

Ad

Question about L-372 Mechanical Sewing Machine

1 Answer

draw the thread from left to right over the take-up lever and down into the take-up lever eye. [5][6] Then down through the lower thread guides. [7] Slide the thread behind the needle bar thread guide

Question about LS-1217 Mechanical Sewing Machine

1 Answer

...draw up the bobbin thread what should i do Check the needle to see if it's damaged Make sure the bobbin has a 3-5 inch thread tail Then make sure the top thread has a 3-5 inch tail Then hold the top ...

Question about XL-5130 Mechanical Sewing Machine

1 Answer

...draw up lower thread, the upper thread will not catch the lower thread no matter what I do. I have cleaned the machine by brushing all the fuzzies and dust away. Try a new needle, make sure that the ...

...draw up the bobbin thread when bringing it to the top in quilting? I find the loop eventually but takes about 15 min. each time. Put your fabric under the foot.  Lower the needle while holding ...

Question about 1600P-DB Mechanical Sewing Machine

1 Answer

...draw all four threads under it and out to the left rear of the sewing platform, lower the presser foot, press the foot pedal and hopefully, chain off. Also check that you are getting the thread into ...

lower thread. How can I fix? Manual is missing, not sure what adjustment can be made, if any. The machine was working and just quit drawing up the lower thread.? here is a link for a free manual, also

...draw up the bottom thread from the bobbin. The needle doesnt go through the hole to catch the thread at the bottom Please elaborate. Is the needle hitting the needle plate so it cannot reach the ...

Question about 1600P-DB Mechanical Sewing Machine

0 Answer

...from the cover toward the rear of the machine. *Draw up the lower thread before starting to sew. Source:http://bit.ly/2Asv4jm Best Sewing Machine Reviews 2018 The Ultimate Buyer Guide iSewing ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

Cindy Wells

Level 3 Expert

6751 Answers

CJ Rock
CJ Rock

Level 3 Expert

4553 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...