Questions & Answers for: wheel string trimmer

...string hanging out of the weed eater (do the same with the other side). -Then turn the inside wheel (I can't remember if it is clock wise or counter clock-wise but it will only turn one way) most of ...

I have a GH400 Black & Decker trimmer/edger; and the line does not advance. I've put in a new line wheel and that didn't help. Any suggestions??? turn it over it must be in backward

...trimmer. no spark . Have replaced spark plug still getting no spark. you need to clean the coil and flywheel of rust from setting. I need to know how to clean the coil and fly wheel of rust.The fly i ...

...wheel. I put it back on but it keeps coming off. Im thinking theres a piece I must have lost that helps hold it on. Thats what Im looking for now. If you can get the belt back on and to stay on then ...

...wheel to add more wire? Hello, In order to add more wire, remove trimmer head by removing center main screw. The whole cap will come off with a little of force towards the outside. Then you will put ...

...need to open the center cap by unscrewing the screw in the middle of the rotatory wheel. Then you will see the channel where the string runs through put the string there and close everything.

gas is leaking from the primer on my swisher walk behind trimmer. What would cause this? i believe you have a cracked primer bulb or cracked fuel line. you should also check and see if the screws are ...

string as big as a pain it is. you have to unscrew the pull mount and rewind it outside the wheel. they tend to loop over the top and this happens when you pull hard and let it snap back by letting it

of oil is used in Ariens st622 string trimmer with a tecumseh 6hp motor Since this is used in the summer any good grade is SAE30 oil will protect the engine..no need for muti viscosity oils..good luck

...trimmer Purchase precut pieces of string. Check the dealer or or big box store for the correct part. The precut string is easily clipped in. Remove the old piece by pushing back and lifting up on the ...