Questions & Answers for: tape loading

tape won't load Hi we have tried to load a tape but all it does is eject the tape. if we take the tape out of the thingy that you put the tape in it does close properly. what's the matter? probobly ...

tape loading will not load tape into unit If you load tape in manually will pull tape around head; check the rubber bert to the capstain motor.

TAPE COMPARTMENT KEEPS POPPING OPEN I HAVE A CANON ZR300 IT KEEPS EJECTING THE TAPE. WHEN I TAKE THE CASSETTE OUT THE COMPARTMENT WILL CLOSE. I Had The Same Issue And Fixed It :o) I Have A Sony ...

...tape instead of loading. The only suggestion in the manual is to take out the tape and reload. It refuses to reload. Any ideas? Try a different tape in case the take up isn't working in the previous ...

Loading 8mm tape into sony ev 80 vcr if familiar with this machine can you tell me wether in this particular machine the tape is loaded completely manually by the user in that I would place the tape ...

Unlocked tapes recognized as locked The unit sees unlocked tapes as locked. It also kicks tapes out without even reading them- a lot. this is probably due to a stuck microswitch in the tape drive unit

tape not loading the tape does no load into the camera. It beeps and rejct it. help..... Tape also not loading. Tape compartment closes o.k with no tape inserted. Have been told it will cost at least ...

...tape from loading properly. Put a tape in & watch closely to see if it draws the tape in, lowers it down & then threads the tape around the heads. If this is not the case & there is ...

loading driver. This can be a failure of the tape end detector which is a IR - infra red- emitter which is placed in the center of the tape tray and MUST feed continuous signal to the END IR 

problem, drive mechanism not moving the tape, unit will sense this and shut unit off----even a problem in the loading mechanism for the VHS tape not loading the tape all the way will do the same thing