...off and get at the laser then a small paintbrush would clean it up nicely. More likely is a bad CD servo mech that needs to be replaced or repaired. Sometimes yes, it can be cleaned because dirt
...loading tray seems to be "catching" on something internally. Any suggestions? The laser distance servo may be faulty and the laser assembly catching on the
...error 3.3 and it shut down? You willneed to have this unit serviced I'm afraid. You have a laser assy problem, or one of three servo circuits are not working. That would be the focus, tracking or the ...
error 11 what's error 11? ERROR-11, ERROR-12, ERROR-17, ERROR-30: This is caused by a dirty disc. Clean the disc and retry.
...some CDs read and other's dont other than damage to one of these components: - Stepping Motor - Servo DSP (IC101) <-- possible issue - Traverse / Pick Up Assembly Good luck! - Davis DJ PRO AUDIO ...
Servo could not be closed. E-8303 PLAYER ERROR (Abnormality in writing to the buffer) 99: Abnormality in writing in the buffer E-8304 MP3 DECODE ERROR (Abnormality in decoding) Abnormality in decoding
...cassette deck needs a little speed adjustment, where is the pot located? Usually on the back of the servo motor. You need a speed alignment tape and frequency counter or wow and flutter meter to do ...
Question about CDJ-1000 CD Player
...give the procedure for changing the head. I have carefully cleaned the rods and lightly oiled the servo spindle. It sometimes reads discs but it is skipping and sometimes doesnt recognise a disc at ...
error code 22 cd does not play and display error code error-22-09 "Error 22" on a Pioneer usually means an unsupported CD format. The disc you are trying to play is not supported or is very badly ...
...are video's on YouTube about how to a CD player or a DVD player that will not open up. Usually bad servo, or the tracks need lubricating. Take it in for service, or remove the case and
Usually answered in minutes!
164 Questions
97 Questions
43 Questions
30 Questions
