Questions & Answers for: Dell adding memory Computers & Internet

video reader knocked loose, moniter won't work. Brought computer to store to see what I needed for more memory. Hard to get cover off, very hard. After memory was added and computer put back together,

COMPUTER DOESN'T RECOGNIZE ADDED MEMORY i added 256mb ram to my computer for a total of 512mb. when i boot up i get an error message saying i only have 256mb and press F1 to continue or F2 for setup. ...

Dell Dimesion 4600-Yellow light after I added memory Hi-I added memory to an old Dell and now a "yellow" light comes on when I power it up----It will not come on at all...any ideas?? Thanks!!! David ...

...section to see if u bought the correct memory type for this computer to upgrade..if yes then proceed to the adding and replacing parts section to check for the instructions on adding

i added more memory to my vista 1501 i added more memory to my microsoft vista 1501 and i don't see the change in my memory? Hello, How much memory do you have now? What Vista are you using (32 bits ...

Dell Dimension 4600 desktop memory upgrade I have a Dell Dimension 4600 desktop with BIOS A10 running 2.8GHz. It is using Windows XP OS and 512MB RAM. I have just purchased 2*1GB RAM for the remaining

...adding more memory help? Adding RAM will help. but normally virtual memory errors occur when the hard drive is nearly full and the system doesn't have room to write to the swapfile as much as the ...

adding memory If it worked prior to adding the new memory check the following. 1. how much memory does the laptop support and how much have you put in. 2. what is the speed of the memory you purchased

...adding or removing hardware. The 3 beep at startup is a fetal memory error code this may be due to either bad memory module or corruption of BIOS. Let me know the result after performing the steps I ...

i added memory to my dell b110 desktop and now the tower wont power on The memory you have added is not compatible sounds like you have installed 266MHz memory when you need either 333MHz or 400MHz ...