2
Anonymous posted an answer for this Bernina Virtuosa 150:
"Sometimes even though the tension is at recommeded placement, you may find with various..."
Anonymous
Anonymous posted an answer for this Necchi 4575 Mechanical Sewing Machine:
"Take a look and see if this is the correct cord. If so, you should be able to replace the..."
Anonymous
Anonymous posted an answer for this Singer Drop-In Bobbin 758B-28BH Mechanical Sewing Machine:
"With your slide plate open, you will see 2 screws on the bobbin case. You need to adjust..."
Anonymous
Anonymous posted an answer for this Brother LS-2125 Mechanical Sewing Machine:
"Here is a diagram: http://www.sewusa.com/Threading_Diagrams/Threading_Pages/Brother_Sewing..."
Anonymous
Anonymous posted an answer for this Janome Memory Craft 9000 Computerized Sewing Machine:
"Try here: http://stores.ebay.com/Glendive-Sew-N-Vac_Power-Cords-Foot-Controls..."
AnonymousAnonymous posted an answer for this Kenmore Sewing Machines:
"You put the hook (the half moon thing with a sharp point on it) in the machine by placing..."
AnonymousAnonymous posted an answer for this Singer Sewing Machines:
"All sewing machines will require maintenance. The difference being that some machines..."
Anonymous
Anonymous posted an answer for this Singer 3116 Simple:
"It sounds like you don't have any tension on the thread when winding the bobbin. Make sure..."
AnonymousAnonymous posted an answer for this Singer Sewing Machines:
"Here is a link to a page that will provide how to thread the machine, bobbin case and wind..."
Anonymous
Anonymous posted an answer for this Yamata FY14U4AD:
"The easiest way to get your threads adjusted and learn which thread does what is to thread..."
Anonymous
Anonymous posted an answer for this Janome Hello Kitty 11706 Mechanical Sewing Machine:
"It sounds as if the machine is not threaded correctly so there is no tension and the..."
AnonymousAnonymous posted an answer for this Singer 3116 Simple:
"Open the bobbin case door and there should be a lever sitting off to the right. It moves..."
Anonymous
Anonymous posted an answer for this Brother CS6000i Computerized Sewing Machine:
"You can contact me at csews@email.com or look at my store..."
AnonymousAnonymous posted an answer for this Brother Sewing Machines:
"You tension should always be between 3-5. There are several things that can cause a..."
Anonymous
Anonymous posted an answer for this Necchi 3102 Mechanical Sewing Machine:
"If you can provide me a picture of the case and hinge, I may have one, send to..."
AnonymousAnonymous posted an answer for this Brother LS-2125 Mechanical Sewing Machine:
"contact me at csews@email.com with model number or look at my ebay store..."
AnonymousAnonymous posted an answer for this Brother LS-2125 Mechanical Sewing Machine:
"When installing the walking foot, you must make sure that the arm that moves up and down..."
Anonymous
Anonymous posted an answer for this Brother CS-8072 Computerized Sewing Machine:
"It sounds like you are not threading the machine properly. The best way is to make sure..."
AnonymousAnonymous posted an answer for this Sewing Machines:
"I can get new ones. You can email me at csews@email.com"
AnonymousAnonymous posted an answer for this Sewing Machines:
"If you machine is truly old (over 20-30 years) then you probably have a broken gear and on..."
AnonymousAnonymous posted an answer for this Sewing Machines:
"I know you hate to hear this but you are probably threading it incorrectly. Make sure that..."
AnonymousAnonymous posted an answer for this Sewing Machines:
"You need to adjust your bobbin tension not the upper tension."
Anonymous
Anonymous posted an answer for this White Sewing 1766 Mechanical Sewing Machine:
"Change your needle and use a ball point."
AnonymousAnonymous posted an answer for this Necchi 3102 Mechanical Sewing Machine:
"The proper tension for the 537 is between 4-6. You need to make sure that your presser..."
Anonymous
Anonymous posted an answer for this Singer 7462 Mechanical Sewing Machine:
"If you have had this repaired several times, I am inclinded to believe that the shop is..."
Anonymous
Anonymous posted an answer for this Kenmore 15208 Mechanical Sewing Machine:
"It sounds as if your machine needs a little oiling. If you have a clear machine oil (not 3..."
AnonymousAnonymous posted an answer for this Elna Sewing Machines:
"When you drop the bobbin into the case, there is a slot that the thread will slide in to...."
AnonymousAnonymous posted an answer for this Husqvarna Viking 1:
"Your machine tension should be set between 3-5. If your stitch is too loose on the bottom,..."
Anonymous
Anonymous posted an answer for this Singer CE-100 Futura Computerized Sewing Machine:
"If the needle is hitting the hook under your bobbin case, your machine is out of time...."
Anonymous
Anonymous posted an answer for this Singer 5050 Mechanical Sewing Machine:
"Here is an easy way to get your thread adjusted. Rethread the machine using four different..."
AnonymousAnonymous posted an answer for this Singer 5050 Mechanical Sewing Machine:
"If you put the bobbin in the case with the thread coming off in a clockwise direction, the..."
Anonymous
Sewing Machines 69 answers
