Questions & Answers for: Black & Decker replace string Home

...replace the spool on the black and decker 14" automatic trimmer? unscrew the knob on the bottom(turn cc wise) pull bobbin straight out . To restring pull start rope gently to see what direction it ...

grasshogXP string trimmer GH1000-ca type 2 7.2 amps Need to replace the spool cap You can order replacement parts from: http://www.toolpartsdirect.com/cgi-bin/noframes.cgi/blackdecker/CST2000_TYPE_1

string on trimmer I can't get the housing off to replace the spool...HELP please I don't think you have to get the housing off for replacing the spool purpose. Usually, take the spool cover first, and

...replace string on black and decker cordless 18v grasshog Go to home depot. look at the floor model and the replacement spools they sell there. Reverse engineer the stringing process or but a ...

...has worn out but I cannot imagine why. can you replace that part? Take your string trimmer reel and throw it in the garbage. Go get a gater head and put it on, it will be the best thing you ever

...string doesn't melt. I don't know if you can buy a replacement grommet. You might be able to a generic grommet like the kind sold for tarps. Or you can replace the whole part that should have the ...

I properly replaced the line spool but it won't feed automatically. After you replaced your string in the trimmer and fed it through the hole in the plastic casing in which the spool fits into, did ...

...replace the string? Remove the large spool bolt on the bottom. Remove the spool. Inside you will find a friction nut. Carefully pry it up around each side with a small flat screwdriver. If it gets ...

...remove the old spool. Insert the new spool with the circular sawtooth design to the inside and push the end of the string through the hole in the side. Replace cap ensuring that both latches

my replacement spool won't lock in and keeps releasing string 36volt 13" B&D trimmer The string keeps unwinding when running and wraps around the cylinder where the replacement spool is suppose to