Questions & Answers for: Dyson object string Computers & Internet

...price! Andrew have you checked that the brush is clean and the belt is clear of any hair or objects, that is usually the problem, maybe the brush isn't spinning, flip it upside down and

The rollers at the bottom of the sweeper have things stuck around them The rollers that pick up the dirt at the bottom of our Dyson has pieces of old rug and strings wrapped around it and I am having ...

Had to stop vaccum this eve-string had gotten tangled on lower roller-got string off-now can not get bottom motor to go Drive belt either came off or broke, remove the bottom plate and check the belt.

object, then turn the vacuum over and turn it on to see if the brush spins, also sometime string and lint and other stringy type objects get rolled around the brush and the space between the brush and

Very little suction from vacuum is occurring after I pulled a string from the roller. Hot air is blowing out of unit. Was working fine until I pulled out a string...Suction is occurring from wand.The ...

brush not spinning I accidentally ran over a string from the drapes. It got caught in vacuum. Turned it off & removed string. Not the brush bar is not spinning. Remove the bottom plate to see if ...

roller bar won't roll Accidentally vacuumed over a boot string which stalled the roller bar. Turned off vacuum, took string out, now the bar won't work. The belt is still taut, the filters have been ...

I ran over a big floor rug with my vacuum and some of the strings from the rug got tangled in the roller on the vacuum. It makes a terribly loud noise even now after I have cleared the strings from ...

Hi, I can't get the warning lights to stop flashing on my vacuum.... it had caught a string on my door mat... I removed the string, did all of the trouble shooting that my guide recommended including ...

how to clean suction tubes have cleaned filter in wheel and taken canister off but want to lean the area on top of canister. tie some string onto a rag and put it in the canister then swith on it will