Questions & Answers for: Magic mic problems Computers & Internet

vocal problem on my magic sing microphone, everything works, melody,tune etc. except no voice is coming out when use to start singing. no vocal at all coming out. please advise. hi there..if there is ...

Entertech mic ed-9000--Mic stopped working My mic just stopped working. I've plugged in as per manual instructions. When the 'on/off' button is pushed, a flashing line occurs on the TV, no sound or ...

Distortion within a certain frequency range for wireless mics on magic sing 11000 We get this bubbly distorted sound from the speakers on the wireless mics during singing, we have two of these mics ...

...to play in US. Audio good but video bad. how to fix the video. I hope you have configured the MIC for NTSC. By default it comes configured for PAL (Indian TV standard). The manual explains how ...

broken karaoke mic ed8000 model Have a karaoke (videoke) mic purchased in the philipines, magic sing xtreme. When turning it on it did not appear to work so I started to press numorous buttons and i ...

...- 2004 - Cannot keep turned on - switches off When connected to the tv and power source, the mic has a difficult time turning on. And if it does get turned on, if the mic or wire is moved, it ...

need local repair help in Central NJ Our mic fell and the face came off. In the process of trying to carefully put the face back on a pin broke. I don't want to keep trying and break more pins. What ...

we have too much echo is there some way to get rid of this? It depends on how close your mics are to your speakers that might be causing those feed backs. Try and get your mics away from the speakers ...

I hear a "pop" from the microphone when singing. What causes this? very common problem caused by pressure waves, try singing off mic but on axis so maybe a 6inches away. or buy a pop shield ...

I have a Magic Sing ET 19KV and both mic showing SynC and no contact with the base unit. But if I put the mic on the base unit stand the Mic is on again... any solution.. Press and hold "2" and power ...