Questions & Answers for: Sharp enter star code Computers & Internet

...enter the simulation mode. "#" key -> ?*? (star) key -> "C" key -> ?*? (star) key (do this in quick sequence order, the display should change, then enter below) Main code {22} -> (Green Copy Button) ...

...enter the service code? More help would be nice. Thanks! To get to service mode, press the # key, the * (star) key, the C (clear) key, then the * (star) key again in rapid succession. This will bring ...

...star,clear,star)to enter test mode.  Enter number 16 and press the copy button.  On the touch screen press "execute" and "yes".  Press CA to reboot.  The error code should

Star enter 14, then touch start execute on the screen the machine will reboot and the code should go away. If it persists you may need some maintenance. If you're in Houston give us a shout. Our labor

Star enter 14, then touch start execute on the screen the machine will reboot and the code should go away. If it persists you may need some maintenance. If you're in Houston give us a shout. Our labor

...Star enter 14, then touch start execute on the screen the machine will reboot and the code should go away. If it's a one-off code this should take care of it. If the problem persists you might need ...

...Star enter 14, then touch start execute on the screen the machine will reboot and the code should go away. If the code comes back you havent gotten all of the paper out. If you're in Houston we'd be ...

star this will enter the sims. now enter 16 on the keypad then select yes. the machine may restart if this fails try the same as above but type 14 instead of 16, also 14 if you can. If this fails your

star sim 14" what key is sim? I'm trying to reset a Sharp copier AR-M205 # * C * ___ 1 4 Hi, To enter service mode on the AR-M205 you need to press the keys: # key, interrupt key, C key, interrupt key

...enter the simulation mode by pressing the # * C * 14 (HARSH - STAR - C - STAR - 14) and then hit the copy button twice. The machine will restart and the error code will stop showing. You have ...