Remote codes for sharp

SOURCE: remote code for my ge universal remote

hello and if you think the guy above me is too confusing then use my shorter version of what he is tring to say.

1.Press and hold both the tv and ON-OFF button
2.Press and release the PLAY button. If after five seconds, the component does not respond,
continue to press the PLAY button every five seconds until it turns off
3.When the component turns off, press and release the REVERSE button, then wait two seconds
to see if the If the component does not respond, continue to press the REVERSE button
every two seconds until the component turns on again.
4.press and release the STOP button. to save the program


..really is it that hard to say this

SOURCE: i need the code for my sharp tv so i can program my rca remote co

After much searching I finally found the code list for RCR451 Universal Remote. Here are the codes for Sharp TV. 1004, 1007, 1009, 1023, 1078, 1083, 1094, 1107, 1123, 1125, 1195

SOURCE: need code for rca rcr461 for sharp tv please help

I don't know if you need 3 or 4 digit codes so i put them both in.

Hope this help's. Instructions on how to insert the codes on the remote are below too.

Hughie.

4digits:

0079
0123
0063
0020
0004
0009
0226
0266
0006
0095
0122

3 digits:
004,
006,
009,
020,
063,
079,
095,
111,
112,
114,
122,
123,
124,
173,
226,
266


1.

Press and hold the SETUP
button until the red
indicator stays on, then
release the SETUP button.

2.
Press and release the
desired Mode button (TV,
VCR, etc.). The red
indicator blinks, then
stays lit.

3.
Enter the 4 / 3 digit code from
the code tables. Note:
after a valid code entry,
the red indicator turns off.
For an invalid code, the
red indicator flashes.

4.

With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required. Note: If some
buttons do not operate
your device, try one of the
other codes for your
brand.

SOURCE: RCA Remote (RCR312W) Code for Sharp TV (19R-M100)

I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
try repeating all the steps again
if this doesnt help try replacing the batteries and then repat all the steps

SOURCE: RCA Remote (RCR312W) Code for Sharp Television (19R-M100)

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating