How do I program my KX-TG6071M - Lands Phones

Just a matter of reprogramming.

Pt Programming - Panasonic KX-TEM824 Features Manual

https://www.manualslib.com > ... > Features manual
Panasonic KX-TEM824 Manual Online: Pt Programming. Description A proprietary telephone (PT) can be used to customise the settings of the PBX or of an ...

• 
  

  Panasonic KX-TEM824 User Manual - ManualsLib

  https://www.manualslib.com > ... > PBX > KX-TEM824
  View and Download Panasonic KX-TEM824 user manual online. Advanced Hybrid System. KX-TEM824 pbx pdf manual download. Also for: Kx-tes824.

KX-TES824 Model KX-TEM824 Installation Manual

https://business.panasonic.sg > psd > 2020/06/08
PDF
Jun 8, 2020 - Explains how to install and use KX-TE Maintenance Console, a PC-based programming utility. Section 4 Troubleshooting. Provides information on ...
98 pages

the wire that is used to connect the line to the telephone is not proper...

Apply a hammer to the unit multiple times.

Move it away from other electronics, TV's microwave ovens, etc. Try it in a different part of the house to see if the static is location sensitive. It must be getting interference from someplace. The manual should describe a procedure for changing channels although that may not solve the problem unless the "static" is an interfering RF signal. If this is a remote handset problem, it may be too far from the base or the signal is obstructed by something. 5.8GHz does not have the range of the lower frequency phones.

-Possibly the hands set is away too far and its base can't communicate.


Good luck & enjoy

Mai

How do i program many Panasonic KX-T7730 and setting time

Hi it is available fvrom panasonic at this link

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Business-Home-Systems/System-Phones/Advanced-Hybrid-Phones/model.KX-T7730B

hope it helps

jim

Hi trinigirl, You should not have to do anything to make the caller id information come through. There is no programming to perform for the regular caller id identification on your display after the second ring (it takes at least one ring cycle for the digital information to pass through). Your model also has the talking caller id function, which will announce in English the callers name or a custom name you can prepare in the phone book of handset number 1. With all that said, you are not getting caller id showing after the second ring, then your phone is bad (which is pretty rare for this symptom), or your phone line still does not have caller id activated. To troubleshoot your problem you need another phone line with working caller id and/or a different phone that is known good to pass caller id. That way you can interchange the phones/lines to see if it is your line or your phone. My guess it is your line somehow, though I have fixed phones that won't pass caller id, but rarely. If it is your phone, try rebooting it, thats about all you can do short of sending it in for repair. Let me know how it goes. CG

No, it cannot. Not even close. You are stuck with the KX-TGA200b, KX-TGA400b, KX-TGA420b