Ive got a zanussi wjs1665w and when on tumbledry it displays error code e10 and stops. can u tell me what is wrong please?
I had this problem, the washer/dryer stopped working while in the drying cycle and displayed e10 message. It was caused by a faulty three-way inlet valve. The solenoid controlling flow to dryer condenser proved to be open circuit. Pulled washer out from under counter top, unplugged, removed top cover, tested solenoid circuits with ohm meter and found one solenoid was faulty. The filter going into the unit was clear. Replaced whole three way component with one ordered on Internet and all now works fine. Noticed that during drying cycle, water to condenser is constantly being switched on and off, explaining why the green condenser solenoid is the one that wears out first.
The E10 error code means - not filling water. The problem could be because of clogged filters on the water inlet line or a malfunction inlet valve.
2,449 views
Usually answered in minutes!
×